
To change the display language
Base settings
▲
▼
COK
▼
Press the UP or DOWN button until the display shows SET.
Press the OK button.
Press the DOWN button until the display shows LANGUAGE.
System Code
Your base station has a default setting of 0000 but you may want to change this to prevent unauthorised use of the handset.
If you change your System Code keep record of the new number by writing it in the space provided on page 4.
C OK | Press the OK button. |
▲ | Use the UP or DOWN button to select |
▼ | the language you require (English, |
| German, Spanish, Italian, Dutch, |
To change your System Code
Portuguese or French). |
C | OK | Press OK to confirm. |
|
| The display will show DONE. |
C | OK | Press the C button twice to exit. |
To switch automatic end call on or off
If you switch automatic end call ON you can end a call by simply placing the handset back on the base. This means you won’t always have to press the RED PHONE button to end a call.
▲
▼
COK
▼
COK
DEF
3
1
OLD
CODE
Press the UP or DOWN button until the display shows BASE.
Press the OK button.
Press the DOWN button until the display shows PARAM.
Press the OK button.
The display will show F.
Press the 3 button.
Press the 1 button.
Enter the existing code (0000 if not changed). As you enter each digit in turn, the dash will stop flashing.
▲Press the UP or DOWN button until
▼the display shows SET.
NEW
CODE
Four dashes will be shown on the display. Enter your new System Code. As you enter each digit in turn the
COK
▼
COK
▲
▼
COK
COK
Press the OK button.
Press the DOWN button until the display shows END CALL.
Press the OK button.
Use the UP or DOWN button to select either OFF or ON.
Press OK to confirm.
The display will show DONE.
Press the C button twice to exit.
CONFIRM
CODE
COK
dash will disappear.
Enter your new System Code again.
Press the C button twice to exit.
15