BT 2100 Install the rechargeable batteries in the handset, Battery levels, Battery low warning

3Install the rechargeable batteries in the handset

The handset uses two rechargeable Nickel Metal Hydride Ni-MH) AAA batteries which are supplied. Take care to insert the batteries as shown and then fit the battery cover (this can be found in the packaging with the batteries).

4Charge the handset for at least 16 hours

Before you use your Freestyle 2100 for the first time, it is important to have the batteries fully charged. The batteries need to charge continuously for at least 16 hours to reach full charge.

Place the handset on the base, the battery icon will initially show empty. After a short time period the battery icon will show 100%. This means that the battery is charging and does not mean that the handset is fully charged.

Once the battery has been fully charged (after the initial 16 hours) and the handset is removed from the base the battery icon will show 50%, this shows that the battery is charging correctly.

Battery levels

Empty50%100%

flashing

Battery low warning

If the handset battery symbol is empty and flashing, you will need to recharge your handset before you can use it.

Battery performance

Under no circumstances should non-rechargeable batteries be used. Only use the approved batteries, type: rechargeable Nickel Metal Hydride (NiMH); Size AAA; Capacity 600 mAh. Using unapproved batteries will invalidate your guarantee and may damage the telephone.

To keep your batteries in the best condition, leave the handset off the charger for a few hours at a time (after the initial 16 hour charge).

Please note, however, that new Nickel Metal Hydride (Ni-MH) batteries do not reach their full capacity until they have been in normal use for several days.

11