BT 2100 manual To adjust the Recall setting, To restore the default settings

To adjust the Recall setting

The default recall setting (option 2) is set at 100ms which is used by the Public Telephone Network as well as most PBX’s. Normally you will not need to change this setting but some PBX’s may require a longer recall in which case option 1 (280ms) should be selected.

There are 2 settings to choose from.

Prog Press the PROG button.

RPress the R button.

Press 1-2for the setting you want.

Prog Press the PROG button to confirm.

To restore the default settings

This will return your phone to its original factory settings.

Prog		Press the PROG button.
W
9	XY	Press the 9 button.
	Z
		Enter the system PIN number
		(factory setting 0000).
Prog		Press the PROG button. The default
		handset settings are restored.

To change the system PIN number

The system PIN number is factory set to 0000 and is used to access and program certain functions. If you wish you can change this PIN to a four digit number of your choice.

Prog Press the PROG button.

1Press the 1 button, display shows - - - -.

Enter the existing PIN (0000 if it has not yet been changed since purchase), display shows 0000.

Prog	Press the PROG button,
	display shows - - - -.
	Enter your new PIN,
	display shows 0000.
Prog	Press the PROG button,
	display shows - - - -.
	Enter your new PIN again,
	display shows 0000.
Prog	Press the PROG button, the unit
	beeps and the display returns to idle.

Your PIN is now changed.

20