![](/images/new-backgrounds/1277073/27707339x1.webp)
Handset factory settings
PIN number | 0000 |
|
|
Earpiece volume | 2 |
|
|
Handset ringer volume | 3 |
|
|
Handset melody | 1 |
|
|
Keypad lock | Off |
|
|
Babysitter mode | Off |
|
|
Redial memory | Empty |
|
|
Quickdial memory | Empty |
|
|
Calls list | Empty |
|
|
Recall | 100 ms |
Babysitter mode
You can set your Freestyle 2100 handset to dial only a single phone number that you have stored in its memory. This prevents unauthorised calls being made except to the number you specify, this number could be your mobile phone number or another number where you can be reached. This feature could be useful if you are leaving your children with a babysitter and want to leave a contact number, in case of emergencies.
Please note
Babysitting settings will only apply to the handset you programme, therefore if you have purchased a Twin then you may want to programme both handsets.
When babysitter mode is set, you can still receive incoming calls from any number.
IMPORTANT
The Freestyle 2100 handset cannot be used to make emergency 999 or 112 calls when in Babysitter mode unless you choose to store one of these numbers.
To set/change a Babysitter number
Prog | Press the PROG button. | |
|
| |
D |
| |
3 | EF | Press the 3 button. |
|
Enter the system PIN number (factory setting 0000).
Prog | Press the PROG button. |
|
Enter the number you want to set.
| Or |
Clr. | Press and hold the CLEAR button |
| to delete the number already in the |
| memory, then enter the new number |
| you want to set. |
Prog | Press the PROG button to confirm. |
21