Setting up | 13 |
|
|
Parent unit
1.Plug one of the power adapter cables into the socket marked on the back of the Parent unit charger and plug the other end into the mains power wall socket and switch the power on.
2.Activate the batteries by pulling the plastic tab away from the bottom of the Parent unit.
Warning!
Only use the power adapters supplied. Using incorrect power adapters may permanently damage your product.
Battery performance Rechargeable batteries in the Parent unit will last approximately 20 hours in normal use. Please note that new batteries do not reach full capacity until they have been in normal use for several days.
The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the performance time of the Parent unit. Eventually they will need to be replaced. New batteries can be obtained from the
BT Digital Baby Monitor 250 Helpline 0808 100 6554*.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
