20 Using your BT Digital Baby Monitor 250
Be careful not to accidentally switch the torch feature
on because Mute All is automatically switched on when the Torch is switched on.
Setting the Parent unit loudspeaker volume to Volume off is the equivalent of switching the Mute All feature on.
If the 
or 
buttons are pressed whilst Mute All or Mute Low has been set then Mute All or Low will be switched off and the loudspeaker volume will return to Level 3 automatically.
Once the Mute Low sound threshold has been exceeded, baby sounds will be able to be heard for a further six seconds even if they do not reach the Mute Low threshold.
Mute All feature – Parent unit only
The Mute All feature prevents any sound coming out from the Parent unit loudspeaker. With Mute All on you can still monitor your baby using the Baby sound level LED indicators (page 18) and the Crying Alert (page 33).
1.To switch Mute All on, press the 
button located on the top of the unit. The Mute indicator will illuminate red.
2.To switch Mute All off, press the 
button again. The red Mute indicator will go off.
Mute Low
For discreet operation when you do not wish to hear any low level sounds, you can still monitor your baby using the Baby sound level LED indicators (page 18). When Mute Low is switched on, any sounds from the Baby unit to the Parent unit will be muted unless a sound is made above a set level. The set level are sounds that are louder than the first two green LEDs would register, as described in ‘Baby sound level LED indicators on page 18.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
