16 | Setting up |
|
|
|
|
| Positioning your units | Once the units are Linked the green Link light on |
| The Baby unit should ideally be | the top of the Parent unit and the green LED on |
| within | the Baby unit will stop flashing and remain a steady |
| best performance. | |
| green. The units are now ready to use. | |
|
| |
| If you place the Parent and | Important: |
| Baby units too close together | The link confirmation between the two units is vital |
| you will hear a high pitched | |
| for use so they can communicate. If the link between | |
| noise, this is normal. The units | |
| are designed to be located at | the units is broken at any time, the Link indicators on |
| a distance from one another, | both units will flash green as they try to search for |
| e.g. in separate rooms. | each other. The Parent unit displays I’m Linking... |
|
| |
|
| After 30 seconds, if the link is still broken, the Baby and |
|
| Parent units Link indicators will flash red. The Parent |
|
| unit display will show No Link and you will hear an |
|
| alert signal. |
If the link is broken:
•check that the mains power is plugged in and switched on at the Baby unit
•check that both units are switched on
•check that the batteries are charged in the Parent unit
•check that the Parent and Baby units are within range of each other (in ideal conditions the range is up to 300 metres outdoors and 50m indoors)
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
