22 Using your BT Digital Baby Monitor 250
When the Torch is switched on it will automatically switch Mute All on as well. If you then
press the 
button Mute will be disabled and the Torch will remain on. When the Torch is switched off, the previous Mute setting will be restored (No
Mute, Mute All or Mute Low).
Find
You can press the 
button on the Baby unit to make the Parent unit sound an alert beep to help you find it if it’s been misplaced. If the Parent unit loudspeaker volume had been Muted (or set to volume off), the volume level will be reset to the default setting of Level 3.
1.Press 
on the Baby unit. The paging alert will sound at the Parent unit and the display will show
Here I am!
2.To stop the alert, press any button on the Parent
unit or press the 
button again on the Baby unit. If no button is pressed after 2 minutes then the alert will automatically stop.
Torch
The Parent unit has a high intensity white LED torch that can be used when the Parent unit is switched on or off.
1.Press the 
button located on the back of the Parent unit to switch the Torch on and off.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
