BT 3100 manual To automatically insert a pause after an access code

Synergy 3100 user guide ~ 5th Edition ~ 26th September ’02 ~ 4457

To automatically insert a pause after an access code

With some switchboards it may be helpful to dial a pause after entering the switchboard access code, e.g. 9, 11 etc. to enable you to get an outside line.

This feature automatically inserts a pause between the access code and the telephone number that you have entered in the Phonebook. However for this feature to work you must still enter the access code at the front of the telephone number when storing in the Phonebook.

Menu	Press the  button to enter
	the menu.
Vol	Use the DOWN button to
Calls	scroll to SETUP.
Menu	Press the  button.
Vol	Use the DOWN button to
Calls	scroll to PABX.
Menu	Press the  button.
Vol	Use the DOWN button to
Calls	scroll to PBX 1.
Menu	Press the  button.
	Display shows PIN?.
	Enter PIN number.
Menu	Press the  button.
	Enter the access code.

Menu

Menu

Vol Calls

Menu

Vol Calls

Menu

Vol Calls

Vol Calls

Menu

Press the  button.

You can also adjust the length of the pause to be inserted. There are two options available, 3 or 5 seconds to be set to suit the switchboard:

Press the  button.

Use the DOWN button to scroll to SETUP.

Press the  button.

Use the DOWN button to scroll to PABX.

Press the  button.

Use the DOWN button to scroll to PAUSE.

Display shows 3 SEC.

Use the DOWN button to scroll to 5 SEC.

Press the  button. You will hear a confirmation tone.

GENERAL INFORMATION

39