16Using the phone
Call timer
Your handset automatically displays the duration of every external call. The call time will remain on the display until 2 seconds after the call has ended.
Press 
to delete an incorrect digit.
If you have subscribed to a Caller Display service, your caller’s number will also be shown. If the number is withheld the display will show Withheld. If an exact number match is found in the Directory, the name will be displayed instead of the number. See page 37 for more information.
Internal calls
When you receive an internal call, the calling handset number will be shown on the handset display.
Make a call
1.Press 
.
Enter the telephone number and the number is dialled.
Preparatory dialling
Use preparatory dialling to see and check the number on the display before you dial out. The display can only show 12 digits at a time, if you enter a number with more than 12 digits, 3 dots will be displayed to the left of the number to indicate more digits.
1. Enter the number first then press 
or 
to dial.
End a call
1.Press 
or place the handset back on the base.
Receiving calls
When you receive an incoming call, the telephone will ring and the 
icon will flash. If the ringer is set to off, the phone will not ring but you will hear one short beep tone to alert you.
1.If the handset is not in the base/charger, press 
or
to answer the call.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
