BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
To repeat dial a number
Note
This feature works in handset, handsfree and headset modes.
If the number you call is engaged, you can set your Converse 425 to dial a number repeatedly, saving you from
continually having to press the Redial button.
When you hear the engaged tone, press the Redial button
and replace the handset (or press the Handsfree button).
The display shows BUSY.
10 seconds after the handset is replaced, your Converse 425 automatically picks up the line, switches on the loudspeaker and redials the number.
If it is still engaged, you need do nothing, your phone will wait for 45 seconds before repeating the procedure.
This will be repeated every 45 seconds up to a maximum of 15 times or until the call is answered.
When your call is answered,
you can speak to your caller by pressing Handsfree or lift the handset or press the Headset
button and speak.
Note
To cancel repeat dial before your call
is answered, lift the handset or press the Handsfree button or press the Headset button.
Handsfree talking
The handsfree feature allows you to make and receive calls without lifting the handset.
To make a handsfree call
Press the Handsfree button.
You will hear the dial tone.
Dial the telephone number. The number will be shown on the display.
When your call is answered you can either speak in handsfree mode or pick up the handset if you wish to speak to your caller privately.
To receive a call in handsfree mode
When the phone rings, press the Handsfree button and speak
to answer the call.
USING
9
