BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
To set the call timer
You can time the duration of each call.
During a call, press the Clock button. The time of the previous call will be displayed.
Press the Clock button again
to start the timer. You can stop the time by pressing the Clock
button once more.
When you replace the handset or press the Handsfree button
to end the call, the display shows the final duration of the call for a few seconds before returning to the normal clock setting.
Secrecy
When on a call you can talk to someone in the same room, without your caller hearing.
To switch Secrecy on and off
During a call, press and release the Secrecy button.
The red Secrecy light will come on. Your caller cannot hear you.
To resume your conversation, press and release the Secrecy
button again. The Secrecy light will go off.
USING
Using a headset
Note
Converse headsets (RJ11 jack) are available separately
from BT shops or by calling 0870 240 5522.
Plug the headset into the socket marked HEADSET on
the underside of the base.
To make a call, press the
Headset button.
Dial the telephone number.
To end the call, press the
Headset button.
Last number redial
Your Converse 425 stores the last number called which enables quick and easy redialling. A redial number can be no longer than 32 digits.
To redial the last number called
Press the Handsfree button.
Press the Redial button.
The last number you called is redialled.
8
