Decor 500 ~ 4th Edition ~ 15th July ’03 ~ 5096

Call screening/

Call intercept

You can let your Decor 500 answer an incoming call and hear your caller’s voice through the loudspeaker. You can then decide whether to take the call or not.

To screen calls, make sure that the answering machine is switched on and ensure that the loudspeaker volume is set to an audible level.

To check your security code

Del Press the DEL button.

Your Decor 500 will announce the current security code.

To change your security code

When the phone rings, let the answering machine take the call and listen to your caller start to leave a message.

Del

Del

Press and hold down the DEL button. You will hear, ‘Security code setting’.

Release the DEL button. You

If you decide you want to speak to the caller in person, pick up the handset. Your Decor 500 will automatically stop recording and you can speak to your caller as normal.

will hear, ‘First digit’.

Use the  SKIP or SKIP  buttons to move up and down through the digits. Each number is announced as you skip through.

Remote access

Remote access allows you to switch your answering machine on and off and listen to your messages from any Touchtone telephone.

To protect your privacy, messages can only be accessed by entering a 3-digit security code. The pre-set code is 000. If you change your security code it is advisable to make a note of it somewhere safe.

Del

When you hear the number you want, press the DEL button.

You will then hear, ‘Second digit’. Choose the second digit using the same procedure and repeat again for the third.

When you have set all three digits, your new security code will be announced.

20

Page 23
Image 23
BT BT DECOR, 500 Call screening Call intercept, Remote access, To check your security code, To change your security code