BT 5110 manual To set the recall time, To switch temporarily from pulse to tone dialling

BT Diverse 5110 ~ 7th Edition ~ 15th May ’03 ~ 5183

To set the recall time

	You need only adjust this
	setting if your switchboard
	requires a different recall time
	to the pre-set recall time of
	100 MS.
MENU	Press the MENU button.
	Press the DOWN button until
	the display shows BASE SET.
OK	Press the OK button.
	Press the DOWN button until
	display shows ADD FEATURES.
OK	Press the OK button.
	Press the DOWN button until
	display shows TBR.
OK	Press the OK button.
	Press the DOWN button to
	select the recall time 80, 100,
	120, 180, 250, 300, or 600ms.
OK	Press the OK button to confirm.
	The display shows SAVED.
	Press the RED PHONE button
	until you reach the idle screen.

Note

100 ms is the standard setting for most UK switchboards.

To switch temporarily from pulse to tone dialling

If you are using pulse dialling with your switchboard but need tone dialling to use certain functions on your BT Diverse 5110 you can switch to tone dialling during the call.

During the call:

MENU Press the MENU button.

Press the DOWN button until the display shows TEMP TONE.

OK Press the OK button. Tone dialling is now active.

Note

This setting is only for the duration of the call.

GENERAL INFORMATION

BT Diverse Helpline – 08457 908 070

41