BT Diverse 5110 ~ 7th Edition ~ 15th May ’03 ~ 5183
Setting up
IMPORTANT
Please note that your handset is NOT registered to the base station. The BT Diverse 5100 handset will be easily registered once you complete the steps 1 to 3 below.
2Plug the power supply unit into the wall socket
SETTING UP
Plan the location
Situate your product close enough to the telephone and mains power sockets so that the cables will reach.
Make sure it is at least 1 metre away from other electrical products to avoid interference.
Do not situate the product in the bathroom or other humid areas.
WARNING
Do not connect the telephone line cord to the phone socket until your handset is fully charged. This will prevent the risk of the phone being answered before the battery is charged. Answering the phone before the battery is fully charged may prevent it from reaching its optimum capacity.
1Connect the base station
Plug the power supply cable into the power socket on the underside of your base.
3Registering and charging the handset
The display is protected by a plastic film. You can remove this protective plastic film from the display.
BT Diverse Helpline – 08457 908 070
10
