BT DF60 manual Receiving a fax, Delaying a fax

Sending a fax manually

Press the MONITOR button or lift the handset and dial the number. After dialling you can press the START/COPY button immediately, or you can monitor the call’s progress, via the in-built speaker, and press the START/COPY button at an appropriate time. This can be useful if the fax machine you are calling is operating in conjunction with an answer machine which has a long outgoing message. You should press the START/COPY button as the outgoing message is ending.

You can also send a fax during a voice call by pressing the START/COPY button at a convenient point in the conversation.

If your fax call is not successful in connecting, your DF60 will automatically retry four times. If the call is still unsuccessful a confirmation report is printed informing you that the line was busy.

Using the fax machine

Receiving a fax

If set to MANUAL, to receive a fax lift the handset or press the MONITOR button, then press the START/COPY button.

In any other mode your DF60 will answer and receive a fax automatically.

Setting the answer mode is explained in full under the Setting up section of this guide (Page 10).

Caution

Your DF60 uses a thermal printing system. It should be noted that documents printed on thermal paper will fade with time. This time is dependent on light and heat conditions. To keep a permanent copy, photocopy the document using a plain paper copier.

Delaying a fax

This allows you to transmit a Fax to another machine automatically at a pre-set time. This can be useful if you want to send a Fax abroad or at a time when call charges are lower.

Your document must be loaded before starting this function.

•Press the FUNCTION button until DELAYED FEATURE? is displayed.

•Press the YES button and the display shows: DELAYED SEND?

24