BT DF60 manual Setting the fax monitor, Polling

Setting the fax monitor

This lets you monitor the progress of a fax call via your DF60’s in-built speaker.

Your DF60 is supplied with this function switched OFF. We recommend that you keep this function OFF at first and switch it ON later should you need it.

With the fax monitor switched to OFF you will hear fax tones during incoming calls only until your DF60 begins to receive the fax. You will also hear fax tones during an outgoing call up until the call is answered.

With the fax monitor switched to ON you will hear fax tones during incoming and outgoing calls up to the point where the document begins to be sent or received, between pages and at the end of a call.

To switch the fax monitor on

•Press the FUNCTION button until SET OPTIONS? is displayed.

•Press the YES button and display shows:

DIAL MODE?

•Press the NO button until display shows:

FAX MONITOR?

•Press the YES button and display shows:

FAX MONITOR: OFF?

•Press the NO button to switch betweeen OFF and ON.

•Press the NO button to confirm your selection.

Using the fax machine

Polling

This allows another fax machine to retrieve a document from your DF60 or for your DF60 to retrieve a document from another fax machine at a time that’s convenient to them.

To set-up a fax document to be polled by another machine.

•Load the document

•Press the POLL button, display shows:

POLLING?

•Press the NO button, display shows:

POLLED?

•Press the YES button, display shows:

POLLED SET.

•Your fax will then be sent when another fax machine calls your DF60

•To cancel the POLLED settings, press the STOP/CLEAR button.

26