To use call screening
Your Response 125 can answer an incoming call for you, allowing you to identify the caller and decide whether to take the call.
1Make sure that the volume is set to an audible level. (See ‘To adjust the volume’, page 11)
2Allow the incoming call to be answered by your Response 125 as normal. You will hear the caller begin to leave their message.
3If you decide to take the call, lift the handset and you can speak to the caller. Recording will stop automatically.
If, when you lift the telephone handset, your Response 125 does not stop recording, either replace the handset and lift again, or press the STOP button.
To cancel any
procedure
Pressing the STOP button will cancel any procedure currently in progress.
After pressing the button your Response 125 returns to ‘answer on’ mode.
These functions of the Response 125 will not operate whilst the handset is off the base unit:
•Volume control.
•Checking/recording/ deleting outgoing message.
•Checking and setting day and time.
•Switching answering machine on/off.
•Checking and setting answer delay.
•Recording a memo.
18
