Remote access
Control your Response 125 from another telephone using a Touchtone™ keypad.
You can turn your Response 125 answering machine on, and listen to your messages from any Touchtone™ telephone. To protect your privacy, messages can only be accessed by keying in a 2 digit security code.
For your security code, look on the underside of your Response 125’s base unit. (You cannot change the currently set code).
To check for
messages
1Dial your phone number and wait.
2When you hear your outgoing message, press the ✱ button. You hear 2 beeps.
3Enter the first digit of your security code. You hear a beep.
4Enter the second digit of your security code, If you have no messages, you will hear ‘You have no messages. Thank you for calling’.
...and your Response 125 will disconnect the line.
If you have messages,
you hear...
You have x messages.
Message 1.
Your Response 125 will then play your messages, with the day and time they were recorded.
If you hear 4 short beeps, it means you have entered the wrong security code and are invited to try again. Do not
If you take more than 8 seconds to enter a number, you hear ‘Thank you for calling’ and your Response 125 disconnects the line.
To replay the message
you are listening to
While the message is playing, press 4 once on your telephone keypad
The message will replay from the beginning.
19