BT XA 2000 manual Handsets can only be de-registered via another handset

BT Freelance XA 2000 UG ~ 2nd Edition ~ 8th October ’04 ~ 6393

ADDITIONAL

that are flashing indicate other bases that the handset is already registered to).

Enter the base number

(BS 1-4) that you want to register the handset to.

Enter your 4-digit PIN (original factory setting OOOO) and press the  button.

The display will show SEARCH 1, 2, 3, 4 and the symbol will flash as the handset tries to locate the base. When the handset locates the base, the handset will be automatically selected and shown on the display.

Note

If the handset does not locate the base, the handset will return to the previous menu. Try to register again by using a different available base number. Ensure that you are in close vicinity of the base).

Note

Your 4 digit PIN number is 0000 unless you have previously allocated a new PIN number as explained on page 25.

To de-register a BT Freelance XA 2000 additional handset from the base

Note

Handsets can only be de-registered via another handset.

			Press the  button to enter
Menu			the menu.
		s	Use the DOWN button to
C	a	ll	scroll to SETUP and press the
Menu			 button.
		s	Use the DOWN button to
C	a	ll	scroll to DEL HS and press
Menu			the  button.
			The display will show PIN?
			Enter your 4-digit PIN.
Menu			Press the  button.
			Use the UP or DOWN button
R	l
e
d
i
a
		s	to select the handset you want
			to de-register (HANDSET 1-5).
C	a	ll
			Press the  button. Display
Menu			shows CONFIRM?.
			Press . You will hear a
Menu			confirmation beep.

Once de-registered, the handset will display NOT REG.

32