B
Troubleshooting
B.1 Common Troubleshooting Tips B
Common Problems:
•Out of range, client cannot connect to the AirStation.
•Configuration mismatch, client cannot connect to the AirSta- tion.
•Absence or conflict with the Client Driver.
•Conflict of another device with the AirStation hardware.
B.1.1 LED Activity B
Monitoring LED activity helps identify problems.
-Power LED should be GREEN,
-Wireless LED should be GREEN if the line is active. If is it blinking GREEN, wireless communication is active.
-Ethernet LED should be GREEN (100Mbps) or AMBER (10Mbps) while the communication is active.
Table B.1.1
LED Activity Table
If the LEDs indicate that the network is working properly (Power LED is on, Transmit/Receive LED blinks), check the TCP/IP settings of the network.
Changing Client TCP/IP Settings in your computer.
Consult the LAN Administrator for TCP/IP settings.
Windows
To add or change the TCP/IP Settings:
1.On the Windows task bar click Start.
2.Select Settings, then Control Panel.
3.
4.From the list of installed components, verify the TCP/IP
•If this protocol is not yet installed, click the Add button and select the TCP/IP protocol from the list. Refer to Windows Help for more information.
•If this protocol is installed, select this protocol and click the Properties button. Verify the parameters match the settings provided by your LAN Administrator. Make changes if neces- sary, and click OK.
5.When prompted, restart your computer.
Macintosh OS9
1.Open the Control Panels
2.
3.Select Airport
3.Select DHCP or input static IP Address Macintosh OS X
1.Open the System Preferences from your Dock
2.Click Network
3.Select Airport under Show
3.Select DHCP or input static IP Address
B. 1.3 Other Problems
Please refer to www.buffalotech.com for further reference ma- terials or call Buffalo’s
14
