Buffalo Technology WLI-CB-G54A Wireless Zero Configuration Service Windows XP, Specifications

Wireless Zero Configuration Service (Windows XP)

Windows XP offers the Wireless Zero Configuration Service to support 802.11b and 802.11g wireless networking.This service automatically polls the area for available wireless access points. If an available wireless access point is found,Windows attempts to connect to the access point. If no available wireless access points are found, you must manually add the access points.

Note:The Wireless Zero Configuration Service and Client Manager do not function properly together. If you want to use Client Manager, you must disable the Wireless Zero Configuration Service.

Enabling the Wireless Zero Configuration Service

Select Start»Control Panel»Administrative Tools»Services to open the Services window. Select Automatic in the Startup Type field of Wireless Zero Configuration Service to enable the Wireless Zero Configuration Service.

Note:The default Startup Type value of Wireless Zero Configuration Service is Automatic.

Disabling the Wireless Zero Configuration Service

Select Start»Control Panel»Administrative Tools»Services to open the Services window. Select Disabled in the Startup Type field of Wireless Zero Configuration Service to disable the Wireless Zero Configuration Service.

Specifications

Regulatory Information A

Wireless communication is often subject to local radio regulations. Although AirStation wireless networking products have been designed for operation in the license-free 2.4 GHz band, local radio regulations may impose limitations on the use of wireless communication equipment.

Networking Characteristics Compatibility

•IEEE 802.11g Standard for Wireless LANs (DSSS)

•Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.

Host Operating System

Microsoft Windows(r) ME/98/NT4.0/2000/XP

Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledgment (ACK)

Radio Characteristics (Typical Indoor Ranges) R-F Frequency Band 2.4 GHz (2400-2483 MHz)

11 selectable sub-channels

ModulationTechnique Direct Sequence Spread Spectrum

•ODFM for High Transmit Rate

•CCK for Medium Transmit Rate

•DQPSK for Standard Transmit Rate

•DBPSK for Low Transmit Rate

Spreading 11-chip Barker Sequence Bit Error Rate (BER) Better than 10 -5 Nominal Output Power 15 dBm (32mW)

Transmit Rate / Range

High Speed 54Mbps Standard Speed 20 Mbps Low Speed 1 Mbps Open Office Environment 160 m (525 ft.)

270 m (885 ft.)

400 m (1300 ft.)

550 m (1750 ft.)

Semi-Open Office Environment 50 m (165 ft.)

70 m (230 ft.)

90 m (300 ft.)

115 m (375 ft.) Closed Office 25 m (80 ft.) 35 m (115 ft.)

40 m (130 ft.)

50 m (165 ft.)

Receiver Sensitivity -69dBm, -72dBm, -77dBm, - 81dBm, -85dBm, -88dBm -87dBm -90 dBm -92 dBm (depends on data rate)

Delay Spread (at FER of <1%) 65 ns 225 ns 400 ns 500 ns (depends on data rate)

•The range of wireless devices can be affected by metal surfaces, solid high-density materials and obstacles in the signal path.

•In Open Office environments, clients can “see” each other, i.e. there are no physical obstructions between them.

•In Semi-open Office environments, work space is separated by room dividers; client cards are at desktop level.

•In Closed Office environments, workspace is separated by floor-to-ceiling brick walls.

NOTE: The range values listed in Table “Radio Characteristics” are typical distances as measured at Buffalo Technology AirStation laboratories.These values are provided for your guidance but may vary according to the actual radio conditions at the location where the AirStation product is installed. AirStation IEEE 802.11 Channel Sets

The range of the wireless signal is related to the Transmit Rate of the wireless communication. Communications at a lower Transmit range may travel longer distances.

Center Channel ID FCC 1 2412 2 2417 3 2422 4 2427 5 2432 6 2437 7 2442 8 2447 9 2452

10 2457

11 2462 1

1 default channel

External Antenna Connector

MC Card

19 20