Buffalo Technology WLI3-TX1-G54 user manual

System Information - This page contains a summary of the Eth- ernet Converter's settings.

◗The tables present a summary of the settings on the Ethernet Converter. Settings cannot be changed from this page. If the Ethernet Converter is obtaining its IP Address from a DHCP server, then a release and renew button will be present at the bottom of the page. Releasing the IP Address will make the Ethernet Converter impossible to configure without re-initializ- ing the device or using the Ethernet Converter Manager. Only release the IP Address if you are certain you want to do so.

Name and Password - This page contains settings that affect the naming and password protection of the Ethernet Converter.

◗Ethernet Converter Name - The Ethernet Converter name is a quick reference name for the Ethernet Converter. It is only used for the naming of Ethernet Converters in the Eth- ernet Converter Manager.

◗Administrator Password - The administrator password is

used to protect the Ethernet Converter from unwanted configuration changes. Setting the pass- word protects configuration changes from both the Web Based Configuration and the Ethernet Con- verter Manager. It is important to document the password after it has been set. If the password is lost, the Ethernet Converter must be re-initialized. The password must be entered twice, once for verification purposes.

17