AOSS Installation
System Requirements
◗Desktop or Notebook computer with an Ethernet
◗Web Browser 5.0 or later.
◗802.11b or 802.11g access point (Infrastructure Mode) OR a different computer with an 802.11b or 802.11g wireless adapter
AOSS Installation
If your Wireless Router/Access Point supports Buffalo's AOSS technology, then it is recommended to use AOSS. If your Wire- less Router/Access Point does not support AOSS technology, then please skip to the next page. The following steps will guide you through the AOSS process.
◗Plug the Ethernet Converter's AC Adapter into a wall
outlet. Connect the power connector to the back of the Ethernet Converter.
◗After 30 seconds, the wireless light on the Ethernet Converter will become solid. This signifies that the Ethernet Converter startup process has completed.
◗Refer to the Ethernet Converter's AOSS supplement to begin the AOSS setup procedure.
2
