◗Configuration Limitations - The configuration limitations of the Ethernet Converter specify what types of clients can configure the Ethernet Converter through the Web Based Con- figuration. Prohibiting configuration from either wireless or wired clients can have negative effects on your ability to access the Web Based Configuration. Please be certain of your setting changes. Prohibiting configuration from wireless clients creates a rule that says any client that is connected to the Ethernet Converter wirelessly cannot access its Web Based Configuration. Prohibiting configuration from wired clients creates a rule that says any cli- ent that is hard wired into the Ethernet Converter's LAN port cannot access its Web Based Configuration. Prohibiting both configurations makes all Web Based Configuration attempts impossible. The Ethernet Converter must then be
Initialization and Reboot - This page contains settings that restart and
◗Initialize - Initializing the Ethernet Converter restores the Ethernet Converter's settings to the default settings. This will erase all configuration changes made, and the setup will have to be restarted as if the product was brand new. This will erase any passwords as well.
logging into the Ethernet Converter. Please see the troubleshooting section for that procedure.
◗Restart - Restarting the Ethernet Converter performs a simple restart similar to what would occur if the power was cycled on the Ethernet Converter. No settings are lost in this case. The restart process takes 30 seconds and can be confirmed complete when the wireless light is green.
18
