Use common sense while operating this power tool.
Do not use this tool if you are:
•Feeling tired or are under the influence of alcohol or drugs.
•Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
•Overreaching or have improper footing. Handling the tool in this way could cause serious injury. When using this power tool always:
•Wear the proper safety equipment, such as safety goggles, dust masks,
•Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.
•Check to be sure the power switch is in the “OFF” position before plugging the power tool into an electrical outlet.
Follow these steps to maintain safe working conditions and good working condition of power tools. Improper care can result in electric shock or serious injury.
•Secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
•Use the correct tool for the job. Using the correct tool is safer and faster.
•Make sure the power switch is in good working order. If the power switch no longer turns the tool “ON” or “OFF”, discontinue use, and have the tool replaced or repaired.
•Remove the power cord from the power source before storage, changing accessories, or moving the tool.
•Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.
•Keep tools clean, and cutting tools sharp. Maintaining tools with proper care will increase the life of the power tool, and reduce the risk of injury.
•Check to be sure all moving parts are free from binding and are properly aligned.
•Use only accessories that are recommended by the manufacturer for your tool model.
•Hold the tool by the insulated grip when using in an area where contact with a “live” wire is a possibility.
Only qualified repair personnel must perform power tool service. Service or maintenance performed by unqualified personnel
could result in a risk of injury.
Safety glasses and ear protection must be worn during operation.
You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this product. Before use, read carefully and understand all warnings, cautions, instructions and labels. Failure to do so could result in serious personal injury, property damage or even death.
PS07401 | 7 |
