Important Safety Instructions

Before using this tool, you need to become familiar with the operation of the tool. If you are unsure about the operation of the tool, or have any questions about the proper use of the tool, call Customer Service at 1-888-287-6981.

Follow these instructions for safe handling of the tool:

•Always secure and support the work piece using clamps. Do not use your hands to hold the piece in place.

•Be sure your work area is clean and secure before turning the power switch into the “ON” position.

•Turn the tool “OFF” and unplug from the power source before making any changes or adjustments to the wheel.

•Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the Polisher / Sander. Never use gasoline, paint thinner, or other caustic chemicals that can damage the plastic parts of the tool.

•Always use the appropriate safety gear when operating this tool. Including but not limited, to goggles, dust mask or respirator. Always work in a well-ventilated area to reduce your exposure to harmful chemicals and dust particles.

•Before installing the sanding wheel or polishing bonnet, make sure you have checked the following: Use Sander paper and accessories that are rated for 3,000 RPM or greater.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

SYMBOLS

The following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.

Symbol	Name	Description
V	Volts	Voltage (Potential)
A	Amperes	Current
Hz	Hertz	Frequency (Cycles per Second)
W	Watt	Power
Kg	Kilograms	Weight
	Alternating Current	Type of Current
	Direct Current	Type of Current
	Alternating or Direct Current	Type of Current
	Earthing Terminal	Grounding Terminal
	Class II Construction	Denotes Double Insulation
min	Minutes	Time
s	Seconds	Time
	Diameter	Size of Drill Bits, Grinding Wheel Bits, etc.
	No Load Speed	No-load Rotational Speed
…/min	Revolutions per Minute	Revolutions, Surface Speed, Strokes, etc per Minute
1,2,3…	Ring Selector Settings	Speed, Torque or Position Settings

FUNCTIONAL DESCRIPTION

PACKAGE CONTENTS

•Polisher / Sander

•1 Foam Pad And 1 Wool Polishing Bonnet

•1 Wrench

•Handle

•Hex Key

PS07401 7-Inch Polisher / Sander Assembly & Operating Instructions

Buffalo Tools PS07401 Important Safety Instructions, Specific Safety Rules AND/OR Symbols

Models: PS07401