Manuals / Buffalo Tools / Household Appliance / Smoke Alarm

Buffalo Tools Smoke Alarm manual Set-Up and Operation, Filter Removal Instructions

Models: Smoke Alarm

1 17
Download 17 pages 31.31 Kb
Page 11
Image 11

Filter Removal Instructions:

1.After the ViroSafe Filter has been exhausted and requires changing, turn the smoke evacuation system off and disconnect any accessory tubing attached to the filter.

2.Pull the ViroSafe Filter from the smoke evacuation system and dispose of in accordance with facility biohazard practice and policy. The ViroSafe Filter may be disposed of or incinerated.

3.Clean the unit with appropriate germicide prior to re-use. Follow the indicated instructions for maintenance and installation of a new ViroSafe Filter.

CAUTION: Using any filter or accessory not supplied by BUFFALO FILTER may cause damage to the system and may void the warranty.

WARNING: The ViroSafe Filter should be changed when the red blinking Filter Life Indicator shows 0% life remaining. Failure to change this filter may result in decreased efficiency and contamination of the electric motor, vacuum pump, and sound absorbing media within the system.

2.3 Set-Up and Operation

The operation of the Dell PlumeSafe Smoke Evacuation System(s) are as follows:

1.Install the appropriate ViroSafe Filter.

2.Attach unit power cord to the receptacle on the rear panel of the system. Plug the pronged power cord into an appropriate grounded power outlet.

3.Optional: Insert Footswitch plug into appropriate receptacle on the front of system.

4.Ensure that the evacuation tubing and accessories are fully seated in the inlet of the filter.

5.An evacuation tubing mast is provided with each Dell PlumeSafe Smoke Evacuation System. This mast is located on the right side with an adjustable locking positioner. The evacuation tubing fits within the loop of mast to provide an “Extension Hanger” for convenient location during use.

6.Turn on unit main power by placing the power switch on the rear panel of the machine in the “ON” position.

7.Activate the suction by pressing the motor ON/OFF switch on the membrane panel, OR depressing and releasing the footswitch (if connected).

8.Adjust the suction level to the desired setting by turning the Micro Flow adjustment while the unit is activated. The actual flow rate in liters per minute is indicated in the illuminated LCD display.

9.Deactivate the suction by pressing the ON/OFF switch on the membrane panel, OR depressing and releasing the footswitch (if connected).

10.Replace the ViroSafe Filter when the Filter Life indicator BLINKS RED (0% Life Remaining). Failure to change the filter will significantly diminish performance of the system and may cause a health hazard.

2.3

BUFFALO FILTER®

Dell PlumeSafe® Smoke Evacuation System

 

 

Page 10 Page 12
Page 11
Image 11
Buffalo Tools Smoke Alarm manual Set-Up and Operation, Filter Removal Instructions
Page 10 Page 12

Smoke Alarm specifications

The Buffalo Tools Smoke Alarm is a crucial device designed to enhance home safety by detecting smoke and alerting occupants to potential fire hazards. This smoke alarm integrates advanced technology and user-friendly features, making it an essential addition to every household.

One of the standout features of the Buffalo Tools Smoke Alarm is its dual-sensor technology. Unlike traditional smoke alarms that typically utilize either ionization or photoelectric sensors, this model employs both. The ionization sensor is sensitive to fast-flaming fires, while the photoelectric sensor is more effective against smoldering fires. This combination significantly increases the alarm's ability to detect various types of smoke, providing comprehensive protection.

Another important characteristic is the unit's reliability. The Buffalo Tools Smoke Alarm comes equipped with a built-in lithium battery that has a long lifespan, often lasting up to 10 years. This eliminates the need for frequent battery replacements, making maintenance easier for homeowners. Additionally, the device features an end-of-life alert that notifies users when it’s time to replace the smoke alarm, further enhancing safety.

Ease of installation is a key aspect of the Buffalo Tools Smoke Alarm. The device is designed for straightforward mounting and requires minimal tools. It can be installed on walls or ceilings, adapting to different room layouts and ensuring optimal functionality.

Furthermore, the smoke alarm is equipped with a loud, 85-decibel alarm that effectively alerts individuals even in noisy environments. The sound is designed to wake heavy sleepers, ensuring that everyone in the household is alerted in case of smoke detection.

In terms of design, the Buffalo Tools Smoke Alarm is sleek and modern, making it aesthetically pleasing for various home decors. Its compact size allows for discreet placement without compromising safety features.

Overall, the Buffalo Tools Smoke Alarm is a reliable choice for anyone seeking to improve fire safety in their home. With its dual-sensor technology, long-lasting battery, ease of installation, and effective alarm system, this smoke alarm stands out as a leading option in fire detection solutions. Investing in such a device is a vital step toward ensuring the safety and well-being of all household members.