ROUTINE CLEANING
Before beginning any cleaning procedure, unplug the brewer to avoid the accidental start of a brew cycle.
Clean the pod holder, drip tray and drip tray grate after
each use, using a damp cloth and mild detergent and rinse. With the pod holder and drip tray removed, use a damp cloth with mild detergent to wipe the area below the pod holder and into the drip tray area. Occasionally, wipe the outside of the brewer with a damp cloth. (The reservoir, slide lid, pod holder, drip tray and drip tray grate are dishwasher safe.)
P2912
PERIODIC CLEANING/DESCALING
(Recommended At Least Once a Month.)
Periodically, you should clean and descale the brewer to clear any mineral deposits that may have accumulated due to impurities in the water source. If these deposits are not removed, they can impair the operation of the brewer and reduce the product life.
There are several products available specifically for descaling. We recommend using URNEX® Activated Descaler or JavaClean2 Cleaner and Descaler, available on our web site: www.bunn.com. (White vinegar can be used to descale if a descaling product is not available.)
Follow the directions as printed on the manufacturer’s package.
1) Fill the reservoir with descaling product as described by the manufacturer’s | |
directions, or 946 ml (32 oz.) of white vinegar. Do not |
|
add powder mix directly to the reservoir. Descaling |
|
product must be mixed into a solution before it is |
|
added to the reservoir. |
|
2) Place an empty pod holder into the brewer. Be sure |
|
the holder is locked into place, and set the VOLUME |
|
CONTROL SLIDE LEVER to the maximum position. |
|
3) Place an empty cup or bowl on the drip tray grate that | P2906 |
will hold at least 414 ml (14 oz.) of liquid, and press the |
|
COFFEE BREW BUTTON to start a brew cycle. |
|
4) Once the brew cycle has finished, empty the cup and set |
|
it back onto the drip tray grate. Press the COFFEE BREW |
|
BUTTON again to start a second brew cycle. |
|
5) Once the brew cycle has finished, empty the cup and |
|
the remaining solution, or vinegar from the reservoir. |
|
Remove the Pod Holder; clean the reservoir and pod |
|
holder thoroughly using a mild detergent, then rinse. | P2907 |
NOTE: There is now descaling solution in the internal tank. |
|
Follow the manufacturer’s directions if the solution must be |
|
left in the tank for any period of time. For vinegar, allow the |
|
solution to sit for at least two, but no more that four hours. |
|
6) Fill the reservoir to the maximum line with fresh clean |
|
cold water and place the pod holder back into the brewer. |
|
7) Place the empty cup or bowl back onto the drip tray grate |
|
and press the COFFEE BREW BUTTON to begin a brew | P2908 |
cycle. |
|
12
