INSPECTING THE SPRAYHEAD SEAL
When disassembling your brewer for cleaning, inspect the sprayhead seal for cracks, tears and holes. Although the seal should last for an extended period of time, damage can occur through handling.
CAUTION: The seal confines the hot liquid to the pod holder. Replace the seal if it becomes damaged. Parts are available at www.bunn.com.
| CLEANING THE POD HOLDER |
| ||
| To prevent residue build up, it is a good idea to periodically disassemble |
| ||
the pod holder/screen assembly and clean it with a mild |
|
|
| |
detergent. |
|
|
| |
|
|
| ||
1) | Press and hold the POD RELEASE BUTTON while |
|
|
|
2) | sliding the pod holder out. |
|
|
|
Flip the POD HOLDER upside down and place the holder |
|
|
| |
| cavity over the palm of your hand. |
|
|
|
3) | Using a small object, press the tab of the POD HOLDER |
|
| P2942 |
| INSERT through the hole in the bottom of the pod |
|
|
|
|
|
|
| |
4) | holder to remove. |
| ||
Clean the screen and holder using a mild detergent and rinse. (Dishwasher | ||||
| Safe) |
| ||
5) | Press the insert back through the hole in the bottom of the POD HOLDER. |
| ||
CYCLING THE BREWER
If the brewer has not been used for an extended period of time, it is a good idea to cycle your brewer before brewing a cup of coffee or tea.
1)Remove the reservoir and pod holder from the brewer, clean with a mild detergent and rinse.
2)Refill the reservoir to the maximum line.
3)Insert an empty pod holder into the brewer.
4)Set the volume control lever to the maximum setting.
5)Place a bowl or cup on the drip tray grate that will hold at least 414 ml (14 oz.)
6)Press the coffee brew button.
7)When the brew cycle has ended and water drip out has stopped, carefully remove the pod holder and remove any excess water.
CAUTION: Water is hot!
You are now ready to brew.
STORING THE BREWER
Unplug the brewer and wait for it to cool. If your Pod brewer has been used, it must be stored above 0°C (32°F) to prevent damage to the internal water tank. Empty and dry the water reservoir before storing.
NOTE: Water will remain in the internal tank. If stored for an extended period of time, refer to “Cycling The Brewer” section before using.
14
