AUTO SWEETENER SET-UP

CAUTION - The brewer must be disconnected from the power source throughout the Initial Set-Up, except when specified in the instructions.

1.Remove the top lid and both rear panels.

2.Make sure the brewer water supply is off.

3.Connect sweetener hose from the bag in a box delivery system to the rear fitting marked "Sweetener" . IMPORTANT - System delivery pressure must be regulated between 30-40 psi. System also needs to deliver product for at least 4 minutes without shutting off. Some pump systems shut off after a few minutes of con- tinuous running.

(TB3Q/TB3Q-LP ONLY)

4.Plug brewer into the power source.

5.Place an empty reservoir under the dilution nozzle of the brewer.

6.Close the adjustment valve on the rear of the brewer fully (clockwise), then open (counterclockwise) 1/2 turn.

7.Set the selector switch to the "Sweetened" side and press the "Start" switch momentarily. (The sweet- ener will come out immediately.)

8.Run sweetener for 1 minute, then set selector switch to the "Off" position. The flow will stop.

9.Measure the amount of sweetener dispensed and calculate if the volume needs to be increased or decreased (Dilution cycle is usually between 3 to 3 1/2 minutes).

10.If adjustment is needed, turning the adjustment valve clockwise decreases the amount of sweetener dispensed and turning the adjustment valve counterclockwise increases the amount of sweetener dispensed.

11.After the desired volume has been set, turn the water supply on.

12.Reinstall the top lid and rear panels. The brewer may now be returned to service.

(TB3/TB3-LP ONLY)

4.Set the "Delay knob on the dilution timer to the 3 minute setting. (The minimum delay setting)

5.Plug brewer into the power source.

6.Place an empty reservoir under the dilution nozzle of the brewer.

7.Close the adjustment valve on the rear of the brewer fully (clockwise), then open (counterclockwise) 1/2 turn.

8.Set the selector switch to the "Sweetened" side and press the "Start" switch momentarily. (After approximately 3 minutes the sweetener will come out of the dilution nozzle.)

9.Run sweetener for 1 minute, then set selector switch to the "Off" position. The flow will stop.

10.Measure the amount of sweetener dispensed and calculate if the volume needs to be increased or decreased (Dilution cycle is usually between 3 to 3 1/2 minutes).

11.If adjustment is needed, turning the adjustment valve clockwise decreases the amount of sweetener dis- pensed and turning the adjustment valve counterclockwise increases the amount of sweetener dispensed.

12.Set the "Delay" knob on the dilution timer back to the 6 to 7 minute setting.

13.After the desired volume has been set, turn the water supply on.

14.Reinstall the top lid and rear panel. The brewer may now be returned to service.

Page 8

41465.1

082208

 

Page 7 Page 9
Page 8
Image 8
Bunn TB6Q service manual Auto Sweetener SET-UP, TB3Q/TB3Q-LP only, TB3/TB3-LP only
Page 7 Page 9

TB3Q, TB3Q-LP, TB3-LP, TB6Q, TB6 specifications

The Bunn TB6Q, TB3-LP, TB6, TB3Q, and TB3Q-LP coffee brewers are a popular series of commercial machines designed for high efficiency and optimal performance in busy environments such as cafes, restaurants, and offices. These machines are crafted with a focus on quality, dependability, and advanced brewing technology to deliver a superior coffee experience.

One of the standout features across the Bunn TB series is the ability to brew large quantities of coffee quickly. The TB6Q, for instance, can brew up to 6 gallons of coffee per hour. This high volume brewing capability ensures that establishments can keep up with demand, especially during peak hours. Additionally, the machines come with a unique design that incorporates a pre-infusion feature, allowing for the coffee grounds to be evenly saturated before brewing begins, enhancing the flavor extraction process.

The TB3-LP model is designed for low-profile applications where counter space may be limited. Despite its compact design, it still offers impressive performance, brewing up to 3.8 gallons per hour. The low-profile feature makes it an ideal choice for settings that require efficiency and space optimization without compromising on the quality of the brew.

Another notable member of the series, the TB3Q and TB3Q-LP, feature a quick brew ratio, allowing users to brew up to 3 gallons of coffee in just a few minutes. These models are equipped with easy-to-use controls for simplified operation, making them perfect for staff training and user accessibility.

All models in the TB series include a hot water faucet, allowing users to dispense hot water for tea or other hot beverages quickly. This versatility adds significant value, especially in multi-beverage settings.

Regarding durability, the Bunn TB series is constructed with high-quality materials, ensuring longevity and reliability. The machines also feature internal components that are easy to access for maintenance, thus reducing downtime and improving the overall efficiency of the machine.

In terms of technology, these brewers often incorporate advanced diagnostics to promptly identify service needs or issues. The machines come with a precise brewing temperature control system that ensures each cup is brewed at the optimal temperature for maximum flavor extraction.

Overall, Bunn's TB6Q, TB3-LP, TB6, TB3Q, and TB3Q-LP coffee brewers represent the culmination of advanced brewing technology and practical design for commercial coffee solutions. Their efficiency, quality, and ease of use make them a staple in many establishments, solidifying Bunn's reputation as a leader in the coffee brewing industry.
Top Page Image Contents