TROUBLESHOOTING (cont.)
Freezes, but not
thick enough
Adjust thickness
screen higher
Check for slightly bent auger shaft pins and/or weak torsion springs. Check for dirty or worn seals and bushings.
Brix ratio |
| Too much |
too high |
| alcohol in |
|
| product |
| ||
|
|
|
Adjust
product
Ambient
temperature
too hot
Recommended
for indoor
use only
No
Set into
“DAY” mode
No hood lamps
Is dispenser in “DAY” mode?
No
Yes
Is circuit breaker
tripped?
Yes
Check lamp circuit
Verify all 4 bulbs are 912
series & reset breaker
17 | 41084 102709 |
|