THOROUGH CLEANING OF THE PAF HOPPER (Once a week)
1.Open the Cabinet Door and allow the support arms to lock in place.
2.Slide the gate shut on the powder hopper and remove the hopper. Remove the Cover and empty the contents.
5.Remove the Auger Drive Shaft by turning the screw of the Au- ger Drive Bracket in a clockwise direction.
3.Pull the Ejector Elbow off the Hopper Base. Remove the Slide Gate from the Ejector Elbow.
6.Wash all components in a mild solution of dish detergent using a bristle brush when needed. Rinse and dry each item thor- oughly before reassembling.
NOTE: Parts must be thoroughly dry before adding powder to the hopper.
4.Remove the Wiper Blade and Drive Gear by removing the Retaining Ring from the Wiper Blade Shaft. Remove Auger by pulling it out the front of Hop- per Base.
4 | 43553 071410 |
|
