CAUTION

Operation of boiler with improperly adjusted burner may result in soot damage to side of house.

6.Intake Terminal Location (Direct Vent only) - Locate Air Intake Terminal not less than 12 inches to the left, right, or bottom of the vent terminal. Do not locate air intake terminal above vent terminal. Intake terminal must be at least 12 inches above grade plus snow accumulation; at least 1 foot from a roof soffit; at least 3 feet from an inside corner of an

L-shaped structure. See Figure 9.

7.The LEDV must be vented with 4" Z-Flex Direct Oil™ Vent. 20 feet is the maximum vent length allowed. The vent pipe is available in 5, 10, 15, and 20 foot lengths. Table 1 lists vent part numbers.

Table 1: Vent Pipe Part Numbers

4" Direct Oil™ Vent Pipe

Pipe Length

Part No.

5 Ft.

8113302

10 Ft.

8113303

15 Ft.

8113304

20 Ft.

8113305

8.The vent system must be completed with the Direct Oil™ Vent Kit, which is shipped with the boiler.

Components of this kit are listed in the Repair Parts Section of this manual.

DANGER

Vent pipe may not be spliced. Do not drill through vent pipe. Do not operate boiler if vent pipe has been crushed. Vent pipe must be completely sealed. Do not operate boiler if vent pipe insulation sleeve is damaged, frayed or missing.

B.Vent Installation (Direct Vent and Side-Wall Vent)

1.Install Vent Terminal. See Figure 10.

a.After determining the location from previous Section, cut an opening in the wall for the vent terminal.

•Combustible wall: 8 inches diameter hole is required to maintain a 1 inch clearance to combustible materials.

•Non-combustible wall: 6½ inches diameter hole is required.

b.Secure 10" square trim plate to outside wall.

c.Insert the vent terminal through the opening until the stop bead rest against the trim plate.

d.Slide the 10" square inside trim plate assembly (fitted with gear clamp) onto the terminal pipe.

Figure 9: Intake Terminal Location

13

Page 12 Page 14
Page 13
Image 13
Burnham 81433101R16-1/10 manual Vent Pipe Part Numbers, Intake Terminal Location
Page 12 Page 14

81433101R16-1/10 specifications

The Burnham 81433101R16-1/10 is a highly regarded component within the realm of heating, ventilation, and air conditioning (HVAC) systems, known for its reliability and performance. This specific part is designed to enhance the efficiency of heating systems, making it an essential component for both residential and commercial applications.

One of the standout features of the Burnham 81433101R16-1/10 is its durable construction. Made with high-quality materials, this product is built to withstand the rigors of continuous operation in various environmental conditions. Its robust design ensures a longer lifespan, reducing the need for frequent replacements and maintenance, which ultimately saves on operational costs.

The Burnham 81433101R16-1/10 incorporates advanced technology to optimize energy usage. This part is engineered for high efficiency, meaning that it works to convert a maximum amount of energy into heat with minimal waste. The integration of cutting-edge technology ensures that users experience significant energy savings, which not only helps in reducing utility bills but also contributes positively to environmental sustainability.

In terms of compatibility, the Burnham 81433101R16-1/10 is designed to work seamlessly with various heating systems. This makes it a versatile choice for technicians and homeowners alike, as it can be easily integrated without extensive modifications. The ease of installation is another appealing characteristic, allowing for quicker setups that minimize downtime.

Furthermore, this component prioritizes safety, featuring built-in mechanisms that help prevent overheating and other potential hazards. This focus on safety reassures users that their heating systems can operate efficiently without compromising the well-being of their households or properties.

The Burnham 81433101R16-1/10 is also known for its user-friendly design. Technicians find that maintenance and inspection processes are straightforward, allowing for easy access to components for troubleshooting or routine checks. This practical feature enhances user satisfaction and simplifies operational management.

Overall, the Burnham 81433101R16-1/10 exemplifies a commitment to quality, efficiency, and safety in HVAC applications. Its combination of durability, advanced technology, and versatile compatibility makes it a valuable choice for anyone looking to enhance their heating system's performance. By opting for the Burnham 81433101R16-1/10, users can enjoy efficient heating solutions that meet their needs for comfort and energy conservation.
Top Page Image Contents