Manuals / Burnham / Household Appliance / Boiler

Burnham RSA manual II. Knock-Down Boiler Assembly, Removal of Boiler, Installing the Jacket

Models: RSA

1 52
Download 52 pages 34.98 Kb
Page 9
Image 9

II. Knock-Down Boiler Assembly

A. REMOVAL OF BOILER.

1.Remove, all boiler to skid, hold down fasteners. Refer to Figure 3.

2.Carefully walk boiler to the edge of skid. Tilt the boiler back, allowing an edge to rest on the floor, and remove the skid.

Figure 3: Base on Skid

B. TEST HEAT EXCHANGER FOR LEAKS before proceeding with jacket assembly. Heat exchanger, canopy, and base are preassembled.

1.Install pressure gauge supplied, a hose to the city water and a valve in the supply tapping. Plug remainder of tappings.

2.Fill boiler with water and apply a pressure of at least 10 psig but no more than 30 psig.

WARNING

Do not apply more than 30 psig to boiler.

WARNING

Any combustion chamber which was damaged must be replaced immediately.

CAUTION

If heat exchanger is not square on base DO NOT twist. Carefully lift and reposition.

WARNING

Do not assemble boiler without cerafelt gaskets between heat exchanger and combustion chamber. Gaskets must also be between canopy and heat exchanger.

C.INSTALLING THE JACKET

1.Before jacket can be secured to boiler assembly tankless heater coil or blank plate must be attached. Using rubber gasket and bolts provided secure heater coil or blank plate to boiler extension

by inserting the bolts from the backside of the extension. Refer to Figure 4.

Figure 4: Coil Plate Attachment



Page 8 Page 10
Page 9
Image 9
Burnham RSA manual II. Knock-Down Boiler Assembly, Removal of Boiler, Installing the Jacket
Page 8 Page 10

RSA specifications

Burnham RSA is a prominent figure in the renewable energy sector, specializing in the development and management of renewable energy projects across various scales. The company has established a strong reputation for its commitment to sustainability and innovation, embracing advanced technologies and methodologies to maximize energy efficiency and minimize environmental impact.

At the heart of Burnham RSA's operations lies a diverse portfolio of renewable energy sources, including solar, wind, and biomass. The company's flagship projects often showcase cutting-edge solar photovoltaic (PV) technology, which effectively converts sunlight into electricity. By utilizing high-efficiency solar panels, Burnham RSA can ensure maximum energy generation, even in less-than-ideal weather conditions.

Wind energy is another critical component of Burnham RSA's strategy. The deployment of state-of-the-art wind turbines at strategic locations allows for optimal harnessing of wind energy. These turbines are equipped with advanced control systems that optimize their performance by adjusting their orientation and blade pitch to maximize energy capture based on real-time wind conditions.

In addition to solar and wind, Burnham RSA is actively exploring biomass energy solutions, which involve converting organic materials into usable energy. This approach not only provides a renewable energy source but also contributes to waste reduction, as agricultural and forestry residues can be repurposed to generate power.

Burnham RSA places a strong emphasis on sustainability, ensuring that all projects are designed with environmental considerations at the forefront. The company adheres to rigorous standards for environmental impact assessments and works closely with local communities to promote awareness and education about renewable energy benefits.

Smart grid technology is another area where Burnham RSA excels. By implementing advanced grid management systems and energy storage solutions, the company enhances the reliability and efficiency of renewable energy distribution. These systems allow for better integration of various energy sources, ensuring a stable energy supply even during peak demand periods.

Furthermore, Burnham RSA is committed to continuous innovation, investing in research and development to improve existing technologies and explore new avenues for energy production. This proactive approach not only fosters growth within the company but also contributes positively to the broader renewable energy landscape.

In summary, Burnham RSA stands out in the renewable energy sector through its comprehensive use of solar, wind, and biomass technologies, commitment to sustainability, and focus on innovation. With its advanced systems and community engagement efforts, Burnham RSA is poised to play a significant role in shaping the future of renewable energy.