OPERATION
BASIC OPERATION
TURN ON THE UINT
Press the POWER button on the remote control to switch on the power. The power indicator will light up in green colour, press the POWER button again to switch off the power, and the indicator will change to red.
CHANNEL SEARCH
Press the SOURCE button on the remote control to select the TV or DTV input mode, and press the OK button to confirm.If you are using the unit for the first time, an Installation Guide menu will be displayed to guide you through the channel scan,
Use the remote control to finish channel scan (you can also refer to CHANNEL MENU (page 16) in this manual for the channel scan operation).
NEW INSTALLATION
| Menu Language | English |
| Auto Tuning |
|
EXIT | MENU | OK |
WATCH TV PROGRAM
Press the CH- or CH+ button to select the previous or next channels or press the
list and press the 
buttons to select the desired TV programmes.
CHANGE VOLUME
Press the VOL - or VOL + button to adjust the volume level. Press the VOL - button repeatedly to decrease the volume; press the VOL + button repeatedly to increase the volume from 0 to 100.
CHANGE PICTURE MODE
Press the PIC button repeatedly to cycle through the available video picture modes.
CHANGE SOUND MODE
Press the SOUND button repeatedly to cycle through the available sound modes.
VIEW CHANNEL INFORAMTION
Press the INFO button to display the preset channel information.
MUTE
Press the MUTE button to cut off the sound output, press this button again to resume sound output.
CHANGE INPUT SOURCE
Press the SOURCE button then press the 
buttons to select the input source and press the OK button to confirm.
