ASSEMBLY

ASSEMBLY

Assembly of Moldboard to Mainframe

The Bush Hog 160 Series is shipped in two bundles. The Mainframe, A-Frame and Moldboard Carrier are in one bundle; the Moldboard is in the second bundle. The assembly of the Moldboard to the Moldboard Carrier is made by inserting the Moldboard Pivot Pin and securing with Screws.

Until Hydraulic Cylinders are connected and under pressure of Manual Adjusting Links installed, block Moldboard to Moldboard Carrier to prevent possible tilting and falling from stand.

160 Series 08/10

Assembly Section 3-2

© 2010 Alamo Group Inc.

Page 26
Image 26
Bush Hog 00786976C manual Assembly of Moldboard to Mainframe