ASSEMBLY
160 Series 08/10 Assembly Section 3-5
© 2010 Alamo Group Inc.
ASSEMBLY
Hydraulic Control Valve (Extra Equipment)A 3 Spool 4 way Hydraulic Control Valve, open center or closed center, is available as Accessory Equipment.
This allows you to operate 4 Hydraulic Cylinders from two remote outlets. Connect the 3 Spool Valve to one
outlet to operate three Cylinders. Use the other remote outlet to operate the fourth Cylinder.
If Closed Center Valve is used, do not use the adjustable Relief Assembly. Use the No-Relief
Assembly.
Selector Valve (Extra Equipment)If the Mainframe Swing, Moldboard Pivot and Tilt
are fully hydraulic, as an added feature, all three
Cylinders can be operated from two remote outlets.
Below is a schematic diagram showing proper
routing of two Cylinders through the Selector Valve.
When installing this Valve, observe all safety
precautions as hydraulic lines are under high
pressure (2500 PSI). If additional information is
required concerning your hydraulic system, contact
your Bush Hog dealer.