OPERATION
160 Series 08/10 Operation Section 4-11
© 2010 Alamo Group Inc.
OPERATION
7.2 Blade Pre-Operation Inspection/Service
Before each blade use, a complete inspection and service is required to ensure the blade is in a good and safe
working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure
the blade is ready for operation, conduct the following. OPS- 0020_A
The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
• Ensure the manual canister is secured to the
equipment with the operator’s manual inside.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals. OPS-U- 0011