(SG-20)
(SG-15)
(SL-36)
(SG-8)
(SG-6)
(SG-2)

MAINTENANCE

MAINTENANCE

READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or death may occur unless care is taken to follow the warnings and instructions stated in the Safety Messages. Always use good common sense to avoid hazards.

Never interfere with factory-set hydraulic calibrations. Any change in calibration could cause a failure of the equipment and may result in injury. (SBH-13)

Always maintain the safety signs in good readable condition. If the safety signs are missing, damaged, or unreadable, obtain and install replacement safety signs immediately. (SG-5)

Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in such a way as to be clearly visible and legible. When transporting the Equipment use the Tractor flashing warning lights and follow all local traffic regulations.

Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function.

Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death.

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and fuel are explosive and their presence could present a hazard. Do not check for leaks with your hand! High-pressure oil streams from breaks in the line could penetrate the skin and cause tissue damage including gangrene. To check for a hose leak, SHUT the unit ENGINE OFF and remove all hydraulic pressure. Wear oil impenetrable gloves, safety glasses and use Cardboard to check for evidence of oil leaks. If you suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure.

Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tractor engine is running.

1145 01/11

Maintenance Section 5-2

© 2011 Alamo Group Inc.

Page 85 Page 87
Page 86
Image 86
Bush Hog 1145 manual Maintenance
Page 85 Page 87

1145 specifications

The Bush Hog 1145 is a versatile and robust rotary cutter designed for both commercial and residential applications, making it a favorite among landowners and agricultural professionals alike. Known for its exceptional cutting performance and reliability, the 1145 is ideal for clearing overgrown fields, maintaining pastures, and managing landscapes.

One of the standout features of the Bush Hog 1145 is its heavy-duty construction. Built with a rugged frame and durable components, this rotary cutter is designed to withstand tough operating conditions. The cutter is equipped with a 1/4-inch steel deck that provides superior strength and longevity, ensuring it can handle the rigors of frequent use without the risk of damage.

The Bush Hog 1145 utilizes a high-performance cutting system consisting of specially designed blades that effectively cut through thick grass, brush, and weeds. The blades can be easily serviced or replaced, allowing for minimal downtime and maintenance. The ability to adjust cutting height makes the 1145 suitable for a variety of terrain types, providing optimal performance no matter the environment.

In terms of technology, the Bush Hog 1145 incorporates advanced design elements that enhance its usability. The cutter features a slip clutch that protects the drive system from damage during sudden impacts, allowing the cutter to operate smoothly even when encountering obstacles. Additionally, a fully enclosed gear box helps to ensure that the drivetrain remains well-lubricated and protected from dirt and debris.

Another noteworthy characteristic of the Bush Hog 1145 is its user-friendly design. The rotary cutter can be easily attached to a wide range of tractors, thanks to its standard 3-point hitch compatibility. The lightweight nature of the cutter allows for easy maneuverability, making it ideal for both novice and experienced operators.

User feedback highlights the Bush Hog 1145's efficiency, especially in dense vegetation management. Its adaptability and ease of maintenance further solidify its position as a top choice in the rotary cutter market.

In summary, the Bush Hog 1145 rotary cutter is characterized by its robust construction, advanced cutting capabilities, and user-friendly features. It is a reliable tool that stands out in the landscape maintenance industry, offering versatility for various applications and terrains. Whether for large-scale agricultural use or home landscaping projects, the Bush Hog 1145 continues to deliver exceptional performance.
Top Page Image Contents