IMPORTANT SAFETY PRECAUTIONS

This symbol is used to call attention to safe-

ty precautions that should be followed by

the operator to avoid accidents. When you

see this symbol, carefully read the message

that follows and heed its advice. Failure to

comply with safety precautions could result

in serious bodily injury.

In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the
awareness, concern, prudence and proper training of personnel in the operation, transport, maintenance and storage of
equipment. Lack of attention to safety can result in accident, personal injury, reduction of efficiency and worst of all—loss
of life. Watch for safety hazards and correct deficiencies promptly. Use the following safety precautions as a general
guide to safe operations when using this machine. Additionalsafety precautions are used throughout this manual for
specific operating and maintenance procedures. Read this manual and review the safety precautions often until you know
the limitations.

THE TRACTOR

1. Readthe tractor operator’s manual to learn how to operate your tractor safely. Failure to do so could result in seri-
ous injuryor death and equipment damage.
2. Itis recommended that tractor be equipped with Rollover Protective System (ROPS) and a seat belt be used for all
loader operations.
3. Addwheel ballast or rear weight for stability.
4. Movewheels to the tractor manufacturer’s widest recommended settings to increase stability.
5. Forbetter stability, use tractor with wide front axle rather than tricycle front wheels.
6. Moveand turn the tractor at low speeds.
7. Stoptractor engine, place transmission in park (or neutral), engage parking brake, lowerloader arms to ground,
cycle all hydraulic controls to relieve pressure, allow machinemoving parts to stop, remove ignition key to prevent
unauthorized person from starting engine before dismounting tractor or servicing, repairing, or making adjustments
to the equipment.
8. Wearpersonal protective equipment (PPE), such as, but not limited to, protection for eyes, ears, lungs, head, hands
and feet when operating, servicing, or repairing equipment. Avoid wearing loose clothing or jewelry that may catch
and entangle on equipment moving parts.

THE LOADER

1. Readthe loader operator’s manual to learn how to operate your loader safely. Failure to do so could resultin seri-
ous injury or death and equipment damage.
2. Becomefamiliar with all the machine’s controls and all the caution, warning and danger decals affixed to the
machine before attempting to start or operate.
3. Improperuse of a loader can cause serious injury or death.
4. Donot lift or carry anybody on the loader or in the bucket or attachment.
5. Neverallow anyone to get under the loader bucket or reach through the booms when the bucket is raised.
6. Donot walk or work under a raised loader bucket or attachment unless it is is securely blocked or held in position
7. Avoidoverhead wires and obstacles when loader is raised. Contacting electrical lines can cause electrocution.
8. Makesure all parked loaderson stands are on a hard, level surface.
9. Usea piece of cardboard or wood rather than hands and wear eye protection when searching for hydraulicleaks.
Escaping hydraulic oil under pressure can penetrate skin. If oil is injected into skin, it must be surgically removed
within a few hours by a doctor or gangrene may result.

5