3
1) The SyncFocus is powered by two AAA batteries (not included). Insert batteries into the compartment (G), using the polarity
marks inside for reference. A power meter in the lower left corner of the display indicates battery condition.
2) Insert an SD or SDHC card into slot (J) if greater storage is desired. The card will click into place. You may use SD/SDHC cards
(not MMC cards) up to 32 GB capacity. If the card you insert was previously used in other devices, format it before taking
photos. Press the Enter button (D) to enter Play mode, then press the MENU button (C). Press the Minus key (D) once to select
“Format”, then press Enter. Note the warning that this will erase all les-make sure you have backed up any les you wanted
to keep. Press the Plus key (D) to select “OK”, then press Enter to format the card. Press Enter again to exit the Play mode.
3) Raise the LCD display (A), and press the ON/OFF button (B) briey. The camera will automatically turn itself o after two
minutes of inactivity (this can be changed using the “Auto O” option in the Setup menu).
4) To set the menu language, press the MENU button. Keep pressing the Plus or Minus key until you highlight “Language”,
press Enter, then press Plus to highlight your language and press Enter.
The Date/Time imprint feature is turned on by default. Press the Plus key to highlight “Clock Set” and press Enter. Now set
the Year, Month, Date, Hour and Minute (in order from left to right), using the Plus/Minus keys to make changes, and the
Right key to move to the next item. Once date & time are set, press the Enter button. Use “Date Stamp” to set your preference
(month rst, year rst or o) Press Enter then Exit the menu to return to the preview display. Reset the date/time if you replace
batteries.
5) Turn the reticle focus (E) until the black circle is sharp, then adjust the binocular focus (K) until your subject is sharp. Hold the
camera steady with both hands and press the SNAP button (L) to take a still photo. When using a tripod, you can help avoid
the eects of camera shake by plugging the supplied remote shutter release cable into the jack next to the SD card slot rather
than SNAP to take photos.
6) To shoot a video, press the Right key (D) three times until the red movie camera icon appears at the top right corner of the
display (see “LCD Preview Display Icons”-#10). You can then start shooting the video at any time by pressing the SNAP button.
QUICK START GUIDE: BUSHNELL SYNCFOCUS™ INSTANT REPLAY