videos automatically (according to its current parameter settings) when it is triggered by the PIR sensor’s detection of activity in the area it covers.
You can either move the power switch directly from OFF to ON mode, or stop at the SETUP position first to change one or more settings, then move the switch to ON after you have finished doing so.
SETUP Mode
In the SETUP mode you can check and change the settings of the Trophy Cam with the help of its
NOTE: Always move the power switch from OFF to SETUP mode. It is possible that the camera could lockup if it is switched from ON to SETUP mode. If this occurs, simply move the switch to OFF and then push it up to SETUP again.
SETUP Mode Shortcut Keys/Functions
As mentioned earlier in “Parts & Controls”, four of the keys below the LCD have secondary, “shortcut” functions when the camera is switched to SETUP mode (but the MENU key has not been pressed):
•Press the UP key to quickly set the camera to shoot video clips.
•Press the DOWN key to quickly set the camera to take still photos.
•Press the RIGHT key to manually trigger the shutter. This is useful for testing the
•Press the OK key to replay (review or playback) photos/videos on a connected TV monitor. See “Playing Back Photos/Videos” for more details.
9