on the video monitor. For video clips, press the SHOT (RIGHT) key to start playing, press again to stop.

Press the UP key for the previous photo or video and the DOWN key for the next one. When viewing images, the total number of all images in the SD card and the index of the displaying image are shown in the center of LCD and at the bottom of the video monitor respectively.

Press the OK key to return to live preview state (SETUP mode) when playback is finished.

Deleting Photos or Videos

Cable from “TV Out”

If you see a photo or video during playback on the LCD or video monitor that you want to delete, it can be done easily without leaving SETUP mode:

Press the MENU key. You will see the first “Delete” screen, which lets you selects the option to delete only the currently displayed photo/ video, or all photos/videos (see below).

Highlight the “Delete Current” or “Delete All” option, then press OK.

Next, select “Yes” and press OK to erase only the last displayed photo or video (if you selected “Delete Current”), or every photo and video file on the card (if you selected “Delete All”)-or select “No” and press OK to cancel the operation without deleting any files.

NOTE: after deleting a picture or a video file, the deleted files can’t be restored! It is also possible to delete all files from the card by using the Format parameter.

Reviewing Images Directly From the SD Card

This is the most popular method of viewing images. Since unmounting the

22

Page 22
Image 22
Bushnell 98-1559 / 1-10 instruction manual Deleting Photos or Videos, Reviewing Images Directly From the SD Card