Bushnell 98-1559 / 1-10 instruction manual 60M-1M are set, Selected. Note after setting down

Parameter	Settings	Description
	(Bold=default)
Interval	10S (second)	Selects the length of time that the
	default,	camera will “wait” until it responds
	with a 60M	to any additional triggers from the
	(minute) to1S	PIR after an animal is first detected
	(second) range	and remains within the sensor’s
	of settings	range. During this user set “ignore
	available.	triggers” interval, the camera will
		not capture photos/videos. This
	(60M-1M are set	prevents the card from filling up
	in one minute	with too many redundant images.
	increments,	Settings begin with 10 second
	59S-1S are set	default when parameter is first
	in one second	selected. Note: after setting down
	increments)	past “1S”, settings start over at “60M”.
Sensor	Normal, High,	Selects the sensitivity of the PIR
Level	Low	sensor. The “High” setting will
		make the camera more sensitive
		to infrared (heat) and more easily
		triggered by motion, and the “Low”
		setting makes it less sensitive to
		heat and motion. The High setting
		can be useful when the ambient
		temperature is warm (making it
		more difficult for the sensor to
		detect animals), and the Low
		setting may help in cold weather if
		the camera is being triggered too
		often by anything warmer than the
		surroundings.

16