Features and Operation Explained — Front of Radio
clock to “UTC” (Universal Time Coordinated) the Time DIFF number is the number of hours between “LOCAL” time and “WORLD” time. As an example, San Francisco, CA, is 8 hours behind UTC. Set the “WORLD” time clock 8 hours ahead of “LOCAL” time, rotating the “TUN- ING” dial until the Time DIFF number is “+8”.
2) When the radio is “on”, the 
button stores stations to a Memory Preset number.
MEMORY SET |
|
| |
To memorize a station, tune to it, then press the | button. The word Preset will flash | ||
with a memory number below it. If this is the memory number you want for this station, | |||
press | to complete while Preset is flashing. If this is not the memory number you want | ||
press the<or<button to pick a memory number between 1 to 10 then press | to | ||
complete. You must do this while Preset is flashing or you will have to start over. |
| ||
MEMORY TIPS: You have only four seconds to perform this action or you will have to start over. It is best to write down your memory stations and numbers to make entering them easier.
Note: When a station is stored to memory, whenever the radio is tuned to that station, the
word Preset and its number are always displayed. If you press 
to store a station, Preset will begin flashing and the number will increment to the next number.
U 
The CCRadio SW is equipped with dual alarms and there are two different alar modes to choose from. You can choose to wake up to the radio 
or to a buzzer tone 
. The 
button is used with or buttons to set the alarms and to turn the alarms off.
ALARM SET
I 
To set the alarm time, press and hold 
button until word “Timer A” and the alarm hour begin to flash on the display. While they are flashing, press the “HOUR <” button to set the hour and the “MINUTE< ” button to set the minutes. With the word “Timer A”
still flashing, press and release the “ALARM” | button to set the alarm mode. The | ||
first icon to appear on the display next to the word “Timer A” will be | . This sets the | ||
alarm to Buzzer mode. Press this button again and the | will display, setting the | ||
alarm to Speaker mode. This activates the radio to play a radio station. Press the but- ton again and both icons will disappear from the display, indicating that the alarm is “off”. You have about four seconds between pressing buttons or you must start over.
Alarm Modes:
On “Buzzer”, the alarm will sound for three minutes and the 
will flash.
On “Speaker”, the radio will come on to the station and volume setting that you listened
CCRadio SW | Page 11 |
