Features and Operation Explained
E LIGHT
Pressing the “LIGHT” button will give you about eight seconds of light on the display.
R SETTING CLOCK TIME /SAVING A
STATION TO MEMORY
The Memory/Time SET key works in two ways:
1.When the radio is “off” press and hold for one second until “Hour” flashes. You have eight seconds to set the hour. Use either the Tuning Knob or “UP” and “DOWN” buttons. Press again to set the minutes. Press a third time to confirm when done. You can change from 12 hour to 24 hour clock format by holding the “DISPLAY” button for five seconds.
2.When the radio is “on” the key is used to store a station into memory. First, tune to a station or frequency you want. Press
“MEM T.SET and 
will blink in the upper right corner of the LCD display. Rotate the Tuning Knob to the memory channel where you want to store the sta- tion. The memory channels are num- bered from “00” to “199”. Press “MEM T.SET” again to finalize the memorized
Page 14 |
