Features and Operation Explained
change the AM tuning steps from 10 to 9 kHz. The U.S. uses 10 kHz. Most of the rest of the world uses 9 kHz steps. It could be important to change the AM step rate if you use the “Up” and “Down” button to scan for stations and you happen to be in a foreign country.
}“FREQ”UENCY Button
This is used to directly enter a frequency. You must be in the radio band of your choice before you enter a frequency. AM and SW is straightforward. Press “FREQ” and enter the AM or SW frequency using the numbered keys. For FM you must enter a last digit. To enter 100.3 FM you must press “FREQ” and then press
q 0-9 KEYS
These are used to directly enter a frequen- cy or memory channel. See } “FREQ”- UENCY button for direct entry.
While in U FAVORITES (Memory Scan) mode you can also enter the channel num- ber of a station you memorized. There is a programming quirk, however. Because there are 200 channels, you must key in 3 digits for each number. Channel “00” through “9”
Page 18 |
