Cabletron Systems 520 manual Removing the Cables, Removing the SSR-510 Cables

Installing and Cabling

Removing the Cables

This section describes how to remove cables attached to the SSR-510 and SSR-520 routers.

Removing the SSR-510 Cables

To remove cables from the SSR-510 router, see Figure 2-5 and complete the following steps.

Step Action

1Press the release tab (1) on the cable plug, then pull out the cable.

2Push in the release tabs (2) on the side of the WAN serial cable connector, then pull out the cable.

3Press the release tab (3) on the ISDN cable plug, then pull out the cable.

Figure 2-5.Removing the SSR-510 Cables

2-10