Cabletron Systems 510, 520 The router has been configured and is now ready to be used on the network.

Configuring the Router
4-5
The router has been configured and is now ready to be used on the network.
=====================================================================
SmrtSwtch Rtr 5xx INSTALLATION MENU
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
To fully manage this device telnet to one of the
following IP addresses or select item [3] below.
Out-of-Band: Not Configured
In-Band : 100.100.100.47
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[1] Restart with Factory Defaults
[2] Restart with Current Settings
[3] Go to Local Console
====================================================================
Enter selection : 00:00:05 EZ.001: Starting.
SmrtSwtch Rtr 5xx
00:00:06 EZ.007: Waiting up to 6 seconds for devices to pass self-test.
00:00:08 TFTP.025: Starting tftp of file C:\Program Files\Cabletron\RConfig\DRS\rf10935f.
drs.SRM from 100.100.100.28
00:00:08 TFTP.027: Transfer completed successfully.
Writing to NVRAM.
00:00:08 TFTP.028: Writing to NVRAM completed.
00:00:08 EZ.008: TFTP transfer completed successfully.
*** EasyStart Completed Successfully ***
00:00:08 EZ.009: *** Restarting Router ***
SmrtSwtch Rtr 5xx
====================================================================
SmrtSwtch Rtr 5xx INSTALLATION MENU
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
To fully manage this device telnet to one of the
following IP addresses or select item [3] below.
Out-of-Band: Not Configured
In-Band : 100.100.100.47
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[1] Restart with Factory Defaults
[2] Restart with Current Settings
[3] Go to Local Console
====================================================================
Enter selection :